top of page
One-Way Vinyl
Installation Guides
Our installation guide is focused on a vehicle graphics installation, however the same principles apply
when applying vinyl graphics to other applications.
IMPORTANT NOTES BEFORE YOU BEGIN
PREPARING THE INTENDED SURFACE:
Before you apply one-way vision graphics to a window, ensure that it has been thoroughly cleaned and dried. A general wash is usually good enough but it is advisable to use Isopropyl Alcohol Spray over the areas where the graphics will be installed to ensure waxes, grease and dirt have been fully removed.
DO NOT apply one-way vision graphics wet. A wet application is not suitable for one-way vision graphics.
If you have a full graphics kit, you can view the step by step installation guide here
bottom of page